Exhibit Information

Company Introduction

We are leading technology company and one of the most famous PCB hardware and accessories manufacturers in Japan.
Our products like Spacers, Connectors, Test Pins, Jumpers and Socket Pins are used by a myriad of industries and
we have established a worldwide reputation for high-quality and uniqueness.

Exhibiting Products

Exhibiting Products 1

PV-5,PV-15 series

[Product Name] Terminal for electric power supply (M5 type)
[Model Number] PV-5,PV-15 series

Can be used to connect wire for electric power supply to SMT board.
After crimping wire, you can mount the crimp terminal to "PV-5" "PV-15" by M5 screw.

PV-5:Wiring direction is parallel to SMT board.
PV-15:Wiring direction is vertical to SMT board.

Can be mounted automatic placement machine.
RoHS Compliant.

Material...Brass
Finish...Sn-plated over Ni
Rated Current...60A

Exhibiting Products 2

KCV-2-1-T

[Product Name] Socket for SMT board, mount vertical direction two SMT boards
[Model number] KCV-2-1-T

Can be used as socket for SMT board in combination with our product "KO-2-1".
For instance, daughter board (Soldered "KO-2-1") can be mounted vertically to motherboard (soldered "KCV-2-1"), these boards are also detachable each other.

To secure vacuum pick space, an adsorption part is attached to socket.
Owing to characteristic of product - single pole pin/socket, adjustment of a pitch is facilitate.

If the upright posture of the daughter board is unstable, please fix the daughter board by use of our product "AXA-15-M3" and suchlike.

Can be mounted automatic placement machine.
RoHS Compliant.

Material...Phosphor bronze
Finish....Au-plated over Ni
Contact Resistance...20m ohm or less
Insertion and Withdrawal times...At least 100 times
Rated current...10A

Exhibiting Products 3

WVH series

[Product Name] Vertical mounting stage for PCB (SMT type)
[Model number] WVH series

Can be used to mount the daughter board (such as the module) to the motherboard.
Soldering this product to the mother board, and then, inserting a daughter board into guide groove of resin part vertically from an upper position.
When the daughter board is mounted to the mother board, the space of about 5mm between the daughter board and the motherboard will be reserved.

There are the following six kinds of products.
Applicable PCB thickness...1.6mm, 1.0mm, 0.6mm
Whether or not an accessory fixing screw is provided.

RoHS Compliant.

Material(Resin part)...PPS Black(UL94V-0)
Material(Metal Part)...Brass
Material(Screw)..Polyamide Ivory(UL9HB)
Finish....Sn-plated over Ni

Contact Information

Address

〒230-0071  5-4-10 Komaoka,Tsurumi-Ku,Yokohama,Japan

Person Job Title

Sales dept.

Person in charge

Shinichi Orii

TEL

045-583-1165

FAX

045-583-1161

Email 1

parts@mac8.co.jp

PR Contact Information

Address

〒230-0071 5-4-10 Komaoka,Tsurumi-Ku,Yokohama,Japan

Person Job Title

Sales dept.

Person in charge

Shinichi Orii

TEL

045-583-1165

FAX

045-583-1161

Email 1

parts@mac8.co.jp

Exhibitor Directory

admission
Pre-registration
now being accepted!

Pre-registration
Go here for any questions. Inquiry Form

Prime Media Partner

List

Media Partner

List

admission Pre-registration now being accepted!

Pre-registration