10/3 - 10/610:00-17:00 at Makuhari messe

Exhibitor DirectoryExhibit Information

Magellan Systems Japan, Inc.

URL
http://www.magellan.jp/english/index.html

Area
THEMED Area
Booth Location
S30-09

Company Introduction

We are the only company which have technology that can be offered as IP or module (H / W) proprietary developed and optimized based on customer's needs on satellite positioning technology typified by GPS and related element technologies.

Especially as regards its high position sensitivity and positioning precision both self and others boast the world's best.

Our L1 Multi GNSS RTK module which is low cost and has a positioning precision of 1cm or less (fixed point) is paid much attention by major tractors, agricultural equipment manufacturers, industrial equipment, crane makers, drone makers, etc. So we are developing and supplying for automatic operation and monitoring.

We are exhibiting at IoT town with Autonomous Control Systems Laboratory Ltd.

Exhibiting Products

Exhibiting Products 1

Next generation high precision multi-frequency multi-GNSS receiver

Four Quasi-Zenith Satellite(QZS) will be full-scale operation in year 2018. MSJ new receiver which can receive L6 signal from QZS is the high precision multi-frequency GNSS receiver and its cost would be less than 1/10 compared with conventional high precision receiver. Thus, further acceleration to launch of autonomous driving of farm machine, construction machine, industrial machine, drone and robot would be expected. We have much expectations to lead to industrial revitalization in Japan as the result of developing this receiver, while overseas manufacturers have large share due to technological reason.

■Core Technology
①High precision positioning algorithm by using multi-frequency of GPS, QZSS and GLONASS.
②Algorithm to output measuring data of carrier phase positioning using GPS and QZSS L1+L2+L5.
③Technology of RTK-PPP(Precise Point Positioning) by using QZSS L6 signal.
④The element technology regarding PPP-AR(PPP ambiguity resolution).
Position accuracy is improved to 2-3cm compared to conventional PPP with 10cm accuracy.

■Feature
①Provide high precision position calculation that receives and decodes signals from all satellite systems.
②Autonomous high precision positioning by using L6 signal from QZSS.
③Work as the high precision multi-frequency GNSS RTK receiver at places in overseas regions which cannot obtain QZSS signal.
④Provide the best solution for autonomous driving by means of the tight coupling technology with IMU.

Exhibiting Products 2

High Precision L1 Multi GNSS RTK Solution

High Precision L1 Multi GNSS RTK Solution uses RTK(Real Time Kinematic) GNSS system.

RTK is the method for measuring rovers position in real time by means of observation corrections which be transmitted from a known position (base station) to the rover through wireless or mobile network. The measuring method which is different from the code phase method which is popular for car navigation or mobile phone is able to get further high-precision position by using carrier phase and observation correction.
Additionally, increasing visible satellites by supporting not only GPS but also other satellite systems contributes to better stable positioning. RTK system which can provide centimeter class accuracy is growing in popularity for not only survey purpose but also for automatic operation for agricultural or construction machine.

■L1 Multi GNSS RTK module spec.
・P/N: MJ-2001-GL1
・Tracking Signals: L1 GPS / L1 GLONASS
・Key Performance
 1cm RTK (Baseline < 5 km), 1 – 10 Hz output rate
18 channels
Low Power Consumption (less than 1W @ 5.0V)
・TTFF
Cold Start: 90sec (typ)
Warm Start: 35sec (typ)
Hot Start: 12sec (typ)
Re-acquisition: 2sec (typ)
・Positioning Accuracy
Autonomous: 3 m
Code Differential: 40 cm
Dynamic RTK: 5 cm + 1 ppm x baseline length (< 5 km) RMS
Stationery RTK: 0.5 cm + 1 ppm x baseline length (< 5 km) RMS
・I/O interface:LV-TTL UART x 2

Exhibiting Products 3

GNSS Inertia Measurement System

MSJ's GNSS inertia measurement system (GNSS IMS), which combines MSJ’s unique GNSS module and IMU (Inertia Measurement Unit), provides high accurate position, velocity, attitude and timing for automated control of industrial equipment, farming machines and robots, etc. Additionally our GNSS IMS has big advantages at low in cost and robust against disturbances. The GNSS RTK module, which provides centimeter level accuracy, and low-cost MEMS sensors are tightly integrated with MSJ proprietary motion detection and control algorithm.

This product won the Grand Prize of CEATEC AWARD 2015 Social Innovation category.

■Feature
①Sophisticated coupling technology of the combination of high precision GNSS system and IMU
Magellan Systems Japan's sophisticated coupling technology (Tight Coupled Integration and Ultra- Tight Coupled Integration) of the combination of high precision GNSS system and IMU provides stable and accurate position, attitude, time and velocity.

②Low cost
In comparison with conventional products, Magellan Systems Japan's unique combination of the GNSS receiver and the IMU, for the IMS (Inertial Measurement System) can achieve effective cost reduction.
GPS + GLONASS L1 RTK receiver which reduced circuit size and uses commonalized component.
IMU uses low cost MEMS sensors

■Applications

・Agricultural Machine
AGV
Industrial/Construction machine
Personal Mobility/Electric Wheelchair
Drone/UAV (Unmanned Aerial Vehicle)
・ADAS(advanced driver assistance system) and V2X(Vehicle-to-everything)

Contact Information

Address

〒660-0083  7-1-3, Doicho, Amagasaki, Hyogo

URL

http://www.magellan.jp/english/

Person Job Title

General Affairs Department

Person in charge

Masaki Takahashi

TEL

06-4950-5520

Email 1

sales@magellan.jp

PR Contact Information

Address

〒660-0083 7-1-3, Doicho, Amagasaki, Hyogo

URL

http://www.magellan.jp/english/

Person Job Title

General Affairs Department

Person in charge

Masaki Takahashi

TEL

06-4950-5520

Email 1

sales@magellan.jp

Exhibitor Directory

Alphabetical order ALL
Search by Product
Multilingual Booth Information
Go here for any questions. Inquiry Form
Join as an Exhibitor at CEATEC JAPAN 2017 Call for Exhibitors
Access
Access
Useful information for visitors is available including admission, accessing Makuhari Messe, area information, and accommodations.

Prime Media Partner

List

Media Partner

List

Simultaneously held events from
  • All about PHOTONICS
  • MEMS SENSING & NETWORK SYSTEM 2017
Event partner
  • BioJapan
  • cofesta
  • japan pack 2017
  • No maps
  • Tokyo Motor Show