NIPPON CHEMI-CON CORPORATION

Address

5-6-4 Osaki, Shinagawa-ku,  Tokyo 141-8605, Japan

URL

URL1：http://www.chemi-con.co.jp/e/

Booth Location

7F07

Introduction

The cutting-edge "Nippon Chemi-Con brand" products will be on display.
We will exhibit new products including Al caps for "energy creation", "energy saving", and "energy storage", EDLC "DLCAP" for vehicle's regenerative braking system, and conductive polymer Al caps newly developed based on our innovative design concept.
Don't miss the chance to see our enhanced lineup of products!

Products

Products-1

Product Name

Electric Double Layer Capacitors "DLCAP" the New "DXE series"

Product Category

Passive components (resistors, capacitors, transformers, inductors, OSCs, crystal oscillators, filters)

Description

Nippon Chemi-Con has developed a new lineup of electric double Layer capacitors, the "DXE series" which have drastically reduced it resistance based on our original technology. The product is optimal for recapturing energy of vehicles, construction machinery, industrial equipment, idle reduction application, energy storage and battery assist application.
Main feature of DXE series its low internal resistance of 0.8mOhm.
Self-heating has been reduced, and the number of cells used in parallel can also be reduced. Heat resistance has been improved to 70 deg C from the previous 60 deg C.

[Main Features]
Category temperature range: -40 to +70 deg C
Rated voltage: 2.5V
Capacitance range: 400 to 1200F
Internal resistance: 0.8 to 2.0mOhm
Product size: 40*65-150Lmm (3 sizes)

The New "DXE series"

Products-2

Product Name

Conductive Polymer Hybrid Al Capacitors, the New "HXA series"

Product Category

Passive components (resistors, capacitors, transformers, inductors, OSCs, crystal oscillators, filters)

Description

Nippon Chemi-Con's new lineup of SMD type capacitors is the "HXA series", a hybrid type Al capacitors using both conductive polymer and electrolyte (liquid type).
The product features low ESR characteristics, high allowable ripple current and high reliability specific for conductive polymer capacitors, and also features low leakage current and high withstanding voltage specific for Al capacitors. ESR has been reduced to one-tenth of the existing low ESR type capacitors, and leakage current to one-twentieth of conductive polymer Al capacitors.

[Main Features]
Rated temperature range: -55 to +125 deg C
Durability: 4000 hours at 125 deg C
Rated voltage range: 25 to 63V
Capacitance range: 10 to 330 uF
ESR: 20 to 120mOhm
Product size: 6.3*5.8Lmm to 10.0*10.0Lmm (4 sizes)

The new "HXA series"

Products-3

Product Name

<Mold Type> Conductive Polymer Al Solid Capacitors, the New "PMA series"

Product Category

Passive components (resistors, capacitors, transformers, inductors, OSCs, crystal oscillators, filters)

Description

Nippon Chemi-Con's new lineup of SMD type capacitors is the "PMA series", a new type of conductive polymer Al solid capacitors which its wound type element is molded by resin. The product has achieved in reducing the height to 4.0mm while maintaining its large capacitance by molding the element by resin without using aluminum case and sealing rubber.

[Main Features]
Category temperature range: -55 to +105 deg C
Durability: 1000hours at 105 deg C
Rated voltage range: 16 to 25V
Capacitance range: 15 to 39uF
ESR: 40 to 55mOhm
Allowable ripple current: 2000 to 2200mArms
Product size: 7*7*4.0Lmm

The new "PMA series"

Contact

〒141-8605
5-6-4 Osaki, Shinagawa-ku, Tokyo
[TEL] 81-3-5436-7716  [FAX] 81-3-5436-7491
Corporate Planning Dept. Public Information Group
[URL] http://www.chemi-con.co.jp/e/

Press

〒141-8605
5-6-4 Osaki, Shinagawa-ku, Tokyo
[TEL] 81-3-5436-7716  [FAX] 81-3-5436-7491
Corporate Planning Dept. Public Information Group
[URL] http://www.chemi-con.co.jp/e/